Our Tractor Bucket Attachments provide the perfect solution for all your agricultural needs. It is built to last and designed to fit any tractor.
Skid Steer Asphalt Bucket
Designed for skid-steers over 100HP, this attachment is both versatile and durable on any job site. It’s reinforced upper latch, 3/4” x 6” wear resistant cutting edge, 1/4” reinforced wrapper, and 1/2” x 4” wear bar make this bucket rugged and allow for high visibility on your job site. Weld on D ring Standard. Optional bolt-on edge and weld-on or bolt-on teeth are available for added durability. Side cutters are lower so the asphalt chunks can drive into the bucket. Optional Weld-on spill guard
3 Heavy Duty buckets to choose from
Asphalt buckets and regular dirt buckets
-Bolt on Edge
-Weld on teeth
-Spill guard
-Tooth Bar
Skid Steer High Dump Bucket
Skid Steer High Dump Bucket
This High Dump Bucket is Ideal for any job that needs extra dumping height like loading up dump trucks, feed mixers, and more
- Windows in bucket for increased visibility
- Greaseable Pivot Points
- 3,000 psi Hydraulic Cylinders
- Made out of 3/16" Grade 50 Steel
- 1/2" wear bars
- 3/4" x 6" cutting edge
John Deere Rock Bucket
The Melecio Attachments Inc. 54′ John Deere Rock Bucket was created especially for the John Deere Series 1 and Series 2 subcompact tractor range. It's meant to operate as a bigger skid loader rock bucket with a 2, 3, or 4-inch tine spacing along with John Deere tractors. Here are some key benefits;
- Cost-effective Design: The 5 Foot Fine Grade John Deere Rock Buckets are compatible with John Deere loaders. The thickened sidewall thickness of 0.5 inches provides strong support. A 4 x 4inch 9gauge tubular steel support has been added to the top of this rock and debris bucket, which adds to the structural stability other rock buckets lack.
Skid Steer Side Dump Bucket
The side dump buckets from Melecio Attachments are versatile for a wide range of tasks, including tunnel excavation, river embankment building, trench filling and road demolition in sand, gravel, loose dirt, and rock. It is also a skid steer side dump bucket as you can easily opt for this attachment. This distinctive bucket may be used as a typical bucket with the addition of a detachable handle. It's ideal for working in crowded work environments and hard-to-maneuver areas, as well as being capable of dumping forward for conventional use.
Skid-Steer Material Bucket – Heavy Duty
HEAVY DUTY MATERIAL BUCKET
With a 3/16” gauge formed, reinforced wrapper, 1/2” x 4” wear bars, 3/16” end plates, and 3/4” x 6” wear resistant cutting edge, this heavy duty material bucket will be able to make light work of heavy material. Mounting brackets fit skid-steer or compact tractors. Optional bolt-on or weld-on teeth and bolt-on edge are available.
Skid-Steer Low Profile Category II Bucket
Skid-Steer Low Profile Category II Bucket
Made with a 3/16" formed reinforced wrapper and a 1/2" x 4" wear bar, reinforced upper latch, optional bolt-on edge and teeth, and over-sized step for easy access, this heavy duty low profile bucket can fit in tight spaces and handle the toughest of loads.
We also offer Serrated Edge bolt as optional
We also offer Serrated Edge bolt as optional
72″ Tooth Bar for Buckets
You will need to drill one matching hole on each end of the buckets sidewall and bolt the Toothbar on with 5/8" or 3/4" diameter bolts - length as required.
This Toothbar will work ONLY on buckets with weld-on cutting edges!
We have Toothbars for bolt-on cutting edges available to list on our eBay Store, but we will need dimensions for fabrication and pricing to provide us with the required dimensions we have different size's available.
This is a very heavy duty Toothbar, good for buckets on tractors or skid-steers. They make a dramatic improvement in digging and clean up of all types of material, multiplying the work of the tractor and the bucket! They will pay for themselves quickly! Weighs about 90 lbs.
Skid-Steer Snow Bucket – Utility
UTILITY MATERIAL / SNOW BUCKET
With a 3/16” gauge formed, reinforced wrapper, 1/2” x 4” wear bars, 3/16” end plates, and 3/4” x 6” wear resistant tapered cutting edge, this utility material bucket will be able to make moving light materials, snow, or other materials on your job site quick and efficient. Mounting brackets fit skid-steer pin-on or quick attach.
Skid-Steer Low Profile Category III Bucket
Designed for skid-steers over 100HP, this attachment is both versatile and durable on any job site. It’s reinforced upper latch, 3/4” x 6” wear resistant cutting edge, 1/4” reinforced wrapper, and 1/2” x 4” wear bar make this bucket rugged and allow for high visibility on your job site. Optional bolt-on edge and weld-on or bolt-on teeth are available for added durability. Optional Weld-on spill guard
3 Heavy Duty buckets to choose from
Asphalt buckets and regular dirt buckets
-Bolt on Edge
-Weld on teeth
-Spill guard
-Tooth Bar
We also offer Serrated Edge bolt as optional
We also offer Serrated Edge bolt as optional
